With the AIS module it is possible to branch with the AIS transponder and to show other ships equipped with AIS on the map. All information coming from other ships can be displayed. This can be the dimensions of the ship, call sign, european ship number, cargo, destination etc... The direction of the ship can be visualised by an arrow. In certain ares like Austria it is possible to receive waterlevel information via the transponder and to use it for the display of the chart.

The AIS interface is build according the international standards for seagoing AIS and the lastest Inland AIS standard as defined by Central Rhine Commission and Danube Commission. The AIS can be used as a position device. With several types of AIS devices it is possible to communicate in two ways. This means that sending / receiving of messages can be done in an easy way via the software instead of the AIS itself. This gives also the possibility to set the "passengers on board" and "destination" directly from the software. You can also communicate easily with certain locks and bridges using the ETA Lock/bridge message. Communication with inland AIS like Nauticast ACR and Saab is build in the software and tested for proper working.
For Seagoing vessels it is possible to control some vessel in the neighberhoud of the own vessel and to puth them in a "AIS Watch" window. There the CPA and TCPA is continiously calculated and displayed. It is working like an ARPA radar but the information is based upon the AIS transponder information of the other vessels.

The AIS module can be activated remotely via a code.